Inhoudsopgave
Advertenties
Anleitung EM 1501_SPK1
19.12.2005
12. Technical data
Voltage:
230 V ~ 50 Hz
Power input:
1500 watts
Motor speed:
3400 rpm
Cutting width:
Cutting height adjustment:
25-75 mm; 6 levels
Volume of catch bag:
LPA sound pressure level:
80 dB(A)
LWA sound power level:
96 dB(A)
≤ 2.5 m/s
Vibration at the handlebars:
14. Troubleshooting
Fault
Possible causes
The motor fails to start
a) The capacitor is defective
b) There is no electricity at the plug
c) The cable is defective
d) The combined switch/plug is
defective
e) The connectors have become
separated from the motor
or the capacitor
f) The mower is standing in high
grass
g) The mower housing is clogged
The motor performance drops
a) The grass is too high or too damp
b) The mower housing is clogged
c) The blade is severely worn
Cutting is irregular
a) The blade is worn
b) Wrong cutting height
Important!
For protection, the motor is equipped with a thermal switch which cuts out when the motor is overloaded and
switches on again automatically after a short cooling period.
All manuals and user guides at all-guides.com
16:23 Uhr
Seite 19
13. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
38 cm
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
40 liters
2
Remedies
a) The mower housing is
clogged Have repaired by
the Customer Service
Center
b) Check the cable and the
fuse
c) Check the cable
d) Have repaired by the
Customer Service Center
e) Have repaired by the
Customer Service Center
f) Start in low grass or on an
area that has already
been mowed; change the
cutting height if necessary
g) Clean the housing so that
the blade moves freely
a) Correct the cutting height
b) Clean the housing
c) Replace the blade
a) Replace or resharpen the
blade
b) Correct the cutting height
GB
19
Advertenties
Inhoudsopgave
