Inhoudsopgave
Advertenties
• Loosen the spark plug using the spark plug wrench, Fig. 18.
• Check the spark plug for discoloration. (stand color light brown)
• Remove the deposits on the spark plug.
• Set the electrode gap to a target value of 0.7-0.8 mm. See Fig. 19.
Replace the spark plug if necessary. See Table 3, p.28.
Pay attention to the cables when removing the spark plug connector and make
sure that you do not damage any of the cables.
EN
V. 1.1
Figure 18
Figure 19
0.7-0.8 mm
27
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
