Inhoudsopgave
Advertenties
national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
Intended use
The tool is intended for trimming hedges.
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Hedge Trimmer
Model No./Type: DUH551, DUH651
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
Model DUH551
Measured Sound Power Level: 91.0 dB (A)
Guaranteed Sound Power Level: 93 dB (A)
Model DUH651
Measured Sound Power Level: 91.1 dB (A)
Guaranteed Sound Power Level: 93 dB (A)
8. 8. 2013
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
8
All manuals and user guides at all-guides.com
CORDLESS HEDGE TRIMMER
SAFETY WARNINGS
1. Keep all parts of the body away from the cutter
ENE014-1
2. Carry the hedge trimmer by the handle with the
ENH032-3
3. Hold the power tool by insulated gripping surfaces
4. Do not use the hedge trimmer in the rain or in wet or
5. First-time users should have an experienced hedge
6. The hedge trimmer must not be used by children or
7. Use the hedge trimmer only if you are in good physical
8. Never use the trimmer when under the influence of
9. Work gloves of stout leather are part of the basic
10. Before starting work check to make sure that the
11. Make sure you have a secure footing before starting
12. Hold the tool firmly when using the tool.
13. Do not operate the tool at no-load unnecessarily.
14. Immediately switch off the motor and remove the
GEA010-1
15. Before checking the cutter, taking care of faults, or
16. Switch off the trimmer and remove the battery
17. When moving the hedge trimmer to another location,
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the hedge
trimmer may result in serious personal injury.
cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover. Proper handling of the hedge trimmer
will reduce possible personal injury from the cutter
blades.
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
very damp conditions. The electric motor is not
waterproof.
trimmer user show them how to use the trimmer.
young persons under 18 years of age. Young persons
over 16 years of age may be exempted from this
restriction if they are undergoing training under the
supervision of an expert.
condition. If you are tired, your attention will be
reduced. Be especially careful at the end of a working
day. Perform all work calmly and carefully. The user is
responsible for all damages to third parties.
alcohol, drugs or medication.
equipment of the hedge trimmer and must always be
worn when working with it. Also wear sturdy shoes
with anti-skid soles.
trimmer is in good and safe working order. Ensure
guards are fitted properly. The hedge trimmer must
not be used unless fully assembled.
operation.
battery cartridge if the cutter should come into contact
with a fence or other hard object. Check the cutter for
damage, and if damaged repair immediately.
removing material caught in the cutter, always switch
off the trimmer and remove the battery cartridge.
cartridge before doing any maintenance work.
including during work, always remove the battery
cartridge and put the blade cover on the cutter blades.
Never carry or transport the trimmer with the cutter
running. Never grasp the cutter with your hands.
GEB062-5
Advertenties
Inhoudsopgave
