Inhoudsopgave
Advertenties
English
44
Listening to the Radio
1. Turn the function selector switch (8) to the RADIO
position.
2. Use the band selector switch (12) to select the
desired frequency band.
VHF (Stereo) = FM ST., VHF = FM,
Medium wave = AM (Mono)
3. Tune in the desired station with the station adjust-
ment knob TUNING (10).
4. The FM.ST control lamp (17) only lights up when
you have selected FM stereo and the station is being
received in stereo quality. If reception is too weak
and there is noise on the station being received, this
lamp will flicker.
5. Try to improve reception by turning and bending or
twisting and altering the length of the antenna (25).
Where reception is bad we recommend switching
to FM.
6. An aerial is integrated into the device for the recep-
tion of AM stations. The machine can be aligned
to the station by turning it. In this frequency band
programs are transmitted in „mono" only.
Playing CDs/MP3
This is how you play a CD
1. Turn the function selector switch (8) to the „CD/MP3"
position.
2. In order to open the CD compartment (1), press the
OPEN button (3).
3. Insert an audio CD with the printed side facing up-
wards on to the central cone so that the CD clicks into
place and then close the lid of the CD compartment.
4. After a few seconds the total number of songs/tracks
is shown in the display.
5. The CD will play from the first title. The track cur-
rently being played, or MP3 are shown in the
display.
6. In order to remove a CD, please press the STOP
button (7/7), open the CD compartment and lift the
CD out carefully.
Always keep the CD deck closed.
NOTE:
• In the case of CDs in MP3 format that contain fol-
ders, when the device changes to a different folder
001 appears for the first track of the new folder.
• If a disc is incorrectly inserted - or no disc has been
inserted - the symbol „- - -" and the word „NO" (no
disc) appear in the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and
CD media available.
05-MC 4443 AEG.indd 44
All manuals and user guides at all-guides.com
Description of the CD buttons
II PLAY/PAUSE (6/1)
Pressing briefly:
You can briefly interrupt and resume playback using this
button. The symbol flashes in the display. Pressing
again continues playback.
Pressing for a longer time:
This selects the USB connexion.
SKIP+ I/I SKIP- (13/14/3)
With an audio CD or a CD in MP3 format playing:
With I/SKIP + you can jump to the next or previous
track etc.
• If the button is kept pressed down, the machine
The I/SKIP - button can be used as follows:
Press once =
Press twice =
Press three times = This plays the song before etc. If the
STOP (7/7)
The CD stops.
MODE (15/6)
With an audio CD or a CD in MP3 format playing:
Press once =
Press twice =
Press three times = the display contains the word RAND
Press four times = all functions are cancelled. The
Only for CDs in MP3 format
Press once =
Press twice =
starts to search through the tracks.
This starts the current track again
from the beginning.
This jumps back to the previous track.
button is kept pressed down, the
machine starts to search through the
tracks.
(the REP emits a fixed light) the cur-
rent track is repeated continuously.
(the
ALL emits a fixed light)
the whole CD is played continuously.
and the track number that is to be
played first. All tracks are played
back in random order.
normal play mode is resumed.
the current track is repeated
continuously (REP appears in the
display).
the selected folder of the MP3 CD
is repeated continuously REP ALBUM
appears in the display). With the
ALBUM button (5/4) you can select
the individual folders.
14.09.2010 14:47:24 Uhr
Advertenties
Inhoudsopgave
