Inhoudsopgave
Advertenties
Electric Chainsaw
1. Introduction to the Operating Instructions
These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in
accordance with the regulations. The Operating Instructions contain important information on how to use the machine
safely, correctly and economically. Observing this information will help increase the reliability and working life of the
machine. The Operating Instructions must always be at hand when the machine is being used.
They must be read and observed by every person dealing with the machine, whether operating, servicing or transporting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country
of use and on site, the generally recognised rules on working safely and correctly must be observed as well as the
accident prevention rules of the relevant professional associations.
2. Illustration and explanation of pictograms
1
2
1 Wear eye, head and ear protection!
2 Warning!
3 Read operation instructions before use
4 Do not subject this electric power tool to rain
5 Remove plug immediately if the power flex is damaged or cut.
6 Attention, kick-back!
7 Hold tool with both hands!
8 Attention: Environmental Protection! This device may not be disposed of with general/ household waste. Dispose of
only at a designated collection point.
3. Technical Data
The devices are manufactured in accordance with the provisions of DIN EN 60745-2-13 and fully comply with the
provisions of the German Product Safety Act.
Model
KSE
Rated Voltage
V~
Nominal Frequency
Hz
Fuse (time lag)
A
Rated Output
W
Guide Bar
mm
Cutting length
mm
Speed
m/sec
Weight
kg
Oil
ml
All models with automatic chain lubrication and mechanical chain brake and rundown brake.
The type designation of the chain you will find on the type plate.
Class of Protection:
Interference Suppression:
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive:
Noise emission values EN-60745:
Vibration values in accordance with EN 60745:
Attention: This chain saw is only intended for cutting wood !!!
All manuals and user guides at all-guides.com
GB | Operating Instruction
3
4
2000
2150
230
230
50
50
16
16
2000
2150
350/400/450
350/400/450
340/380/435
340/380/435
ca. 12
ca. 12
4,6/4,7/4,8
4,6/4,7/4,8
200
200
II/ DIN-EN 60745-1
according to EN-55014
Sound Pressure Level L
Weighted acceleration handle
GB-2
5
6
2400
230
50
16
2400
350/400/450
340/380/435
ca. 12
4,6/4,7/4,8
200
90 dB (A) [K=3,0 dB (A)]
pA
max. 6,1 m/s
7
8
[K=1,5 m/s
]
2
2
Advertenties
Hoofdstukken
Inhoudsopgave
