Inhoudsopgave
Advertenties
Programming Mode
This mode allows the user to assign cook times and power levels to the once touche
button.
1. Open the door and press "1" for 5 seconds,the buzzer will sound once and enter to
Programming Mode.
2. "PROGRAM" displays.
3. Press any number ,0 to 9,and the LED will display the saved time, then you can input
the time
you need.
4. Press "
", "
LED will display the related power. If the same button pressed twice, the power
will change to PL10. If no power chosen, "PL10" is default.
5. To change the cooking fators: If press "X2",LED will display "CF:XX". The default factor
is 80%. "CF:80" displays. If you need to change the cooking power, just press one of
the number buttons to set.
6. After setting the time and power, press "
saved.
When the program saved, "PROGRAM" displays.
7. If all the cooking time exceeds the MAX.time User Option 7, when press "
save the program, the buzzer will sound three times briefly to tell you the time is no
use. And then LED turn back to show "PROGRAM". The time set before will be no
change.
8. Close the door, the oven will turn back to Ready Mode.
If press "
" button during setting process, the oven turn to Door Open Mode.
The program that not saved will be lost. If there is program saved as memory
procedure, press the related number button, the saved program will start. If no saved
program, the buzzer will alarm when pressing number button and it will not work.
NOTE
• If the electricity is cut off, the saved program will not lost.
• If the program need to reset , just repeat the aboved steps.
• If press "
" at the last step, it will turn back to Door Open Mode. The setting will
be no use.
Double Quantity cooking
1. Under ready state, press "X2" button and then press number buttons 0-9 in 5 seconds,
the oven will start cooking with the quantity preset cooking time.
2. Press "X2", "DOUBLE" displays. When press number buttons, LED will display the
quantity preset time.
For example, number button "5" and its preset time is 1 minute. Then press "X2", then
time will change to 1:00*(1+0.8)=1:48
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
", "
" or "
" to input the power level.
" in 30s, the cooking program will be
EN-20
" to
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
