Inhoudsopgave
Advertenties
CHARGING BATTERY
1
Plug in the power adaptor to a wall
socket. The status
Caution! Make sure the appliance is
switched off and completely assem-
bled.
SUCTION HEAD
1
To attach the suction head
onto the suction nozzle 2.
SUCTION NOZZLE
1
To remove the suction nozzle 2, press
the suction nozzle release buttons
and pull it off the motor housing 10.
SURFACE CLEANING
1
Apply some cleaning detergent to the
surface by use of the spray bottle 12.
3
Press the on / off
button 4
the window cleaner and clean the sur-
face from top to bottom. Apply some
pressure, if required.
LED 5
lights red.
1
click it
3
to switch on
2
Plug the power adaptor into the appli-
ance. If the status
unplug the power adaptor from the ap-
pliance and the socket.
2
To remove the suction head 1, press
the suction head release
pull it off the suction nuzzle 2.
2
To remove the dirt water tank 8, pull it
out of the motor housing 10.
Reassemble in reverse order.
2
Wipe the surface thoroughly by use of
the microfibre cloth 13.
4
If the water level has reached the MAX
marking 9, switch off the appliance.
Drain the dirt water tank
the dirt water cap 7. Close it to continue
working.
LED 5
turns green,
button 6
and
8
by pulling
EN
69
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
