Inhoudsopgave
Advertenties
All manuals and user guides at all-guides.com
10. Troubleshooting guide
Caution!
Before troubleshooting, switch off the equipment and remove the battery.
The table below contains a list of fault symptoms and explains what you can do to remedy the problem
if your equipment fails to work properly. If the problem still persists after working through the list, please
contact your nearest service workshop.
Fault
The equipment
- Battery empty
does not work
- Battery is not correctly inserted
Equipment operates
- Loose connection (external)
intermittently
- Loose connection (internal)
- ON/OFF switch defective
Saw chain is dry
- No oil in the tank
- Vent in the oil tank cap is blocked
- Oil outlet is blocked
Chain/guide bar
- No oil in the tank
is hot
- Vent in the oil tank cap is blocked
- Oil outlet is blocked
- Chain is blunt
- Chain is overtensioned
Chainsaw judders,
- Chain is undertensioned
vibrates or does not
- Chain is blunt
saw properly
- Chain is worn
- Saw teeth point in the wrong direc-
Anl_GATS_E_20_Li_SPK7.indb 22
Anl_GATS_E_20_Li_SPK7.indb 22
GB
Possible cause
tion
- 22 -
Remedy
- Charge battery
- Remove battery and insert again
- Consult a specialist workshop.
- Consult a specialist workshop.
- Consult a specialist workshop.
- Top up with oil
- Clean the oil tank cap
- Clear the oil outlet
- Top up with oil
- Clean the oil tank cap
- Clear the oil outlet
- Re-sharpen or replace the chain
- Check the chain tension
- Adjust the chain tension
- Re-sharpen or replace the chain
- Replace the chain
- Refi t the chain with the teeth facing
in the correct direction
27.07.2017 15:02:17
27.07.2017 15:02:17
Advertenties
Inhoudsopgave
