Inhoudsopgave
Advertenties
6. How to clean side brushes and central brush (see fig. 14):
To remove the central brush, remove the cover and brush.
1.
EN
Use the cleaning brush to remove remains on the brush.
2.
Detach side brushes and wipe with a dry cloth.
3.
7. How to clean sensors and wheels (see fig. 15):
Clean a charging port of the docking station, all sensors, central wheel and side wheels
•
with a dry cloth.
8. How to store:
If you do not use the vacuum cleaner for a long time, fully charge it before storing.
•
Charge the device every 3 months to prevent extensive deterioration of battery life.
PROBLEM
The vacuum cleaner
does not charge.
The vacuum cleaner
has difficulties in
vacuuming.
The vacuum cleaner
returns to the
docking station
automatically.
The vacuum cleaner
does not activate
during scheduled
vacuuming.
Remote control does
not work
9. How to prepare rooms for vacuuming
Remove cables and other items which may get tangled in the vacuum cleaner from the
1.
floor (fig. 16).
POTENTIAL CAUSE
No connection with the
docking station.
The battery does not charge.
The vacuum cleaner wraps in
elements of the room (cables,
drapes, etc.).
Low battery.
End of work time.
Vacuum cleaner is off
Low battery
Dustbin is clogged or other
elements are obstructed.
Batteries in remote control
are flat.
The vacuum cleaner is off or
battery is low.
Infrared signal is not received
by the device.
SOLUTION
Make sure charging ports of the vacuum cleaner and
docking station are properly connected. Try to place the
product on the docking station manually.
Make sure the docking station is plugged in. If you have
not used the vacuum cleaner for a long time and battery
does not charge, place the cleaner on the docking station
and charge for 3 minutes, then stop charging. Repeat
3 times and then start charging the vacuum cleaner
normally.
The vacuum cleaner tries to steer clear of obstacles. If it
is impossible, remove obstacles before you start another
vacuuming.
This operation is normal.
This operation is normal.
Switch the vacuum cleaner on.
Charge the battery.
Switch the device off and clean the dustbin and filters.
Replace batteries in the remote control.
Switch the device on and/or charge the battery.
Clean the infrared sensor on the device and remote
control. Check the space between the remote control and
device for any obstacles blocking the signal and other
items emitting infrared signal (e.g. TV remote control).
Advertenties
Inhoudsopgave
