Inhoudsopgave
Advertenties
Troubleshooting
Caution: Always unplug the backpack before attempting to solve a problem or when servicing.
Problem
Cause
Power cord not firmly plugged into
power point, short lead, or machine.
Backpack shuts off due to high
Backpack not
motor temperature.
working.
Circuit breaker or RCD has tripped.
Hypercone dust bag full.
Hypercone dust bag not installed
correctly.
Backpack
has no/poor
Hose not installed correctly.
suction.
Blockages.
Filters blocked.
Service Requirements
Our products are designed and built to be functional and durable. For information on use and maintenance
please read this Product & Training Manual thoroughly.
Should you require servicing contact your nearest Authorised Pacvac Service and Warranty Agent.
Superpro | Duo | Micron
Solution
Check all plugs and sockets are firmly plugged in.
Turn main switch off and unplug the backpack.
Conduct safety and maintenance checks found in
this Product and Training Manual or as per labelling
on the machine. After 30 minutes (60 minutes for
wispa) the backpack should be ready for use. If
not contact the number below for your nearest
Authorised Pacvac Service and Warranty Agent.
Check the machine is in good working order. If OK,
reset circuit breaker or RCD. If circuit breaker or
RCD trips again contact your nearest Authorised
Pacvac Service and Warranty Agent.
Remove, empty and clean Hypercone dust bag.
Remove and empty dust bag making sure the
rubber edging is correctly fitted around the canister.
Reconnect hose and ensure correctly sealed.
Remove hose, wand and floor tools; remove any
blockages.
Clean the Hypercone filter and external motor filter.
ENGLISH
17
Advertenties
Inhoudsopgave
Probleemoplossen
