Advertenties
Beschikbare talen
Beschikbare talen
Troubleshooting
When operating with different protocols you may have problems
in each mode at the same time. – We recommend reducing the
number of protocols. Deactivate protocols in the locomotive
decoder that are not needed and also deactivate if possible
protocols in the central controller that are not needed.
The locomotive jerks and falters – Check the CV setting for
motor variations, change if necessary, or carry out a reset to the
factory settings.
The locomotive does not run in analog. – The automatic analog
recognition is deactivated and must be activated again (see CV
table).
The locomotive (decoder) does not react. – Check the wiring and
the solder joints, redo if necessary. Check the connector for the
decoder to make sure it has permanent contact and check the
way it was installed.
mfx/DCC operation: Locomotives standing on the layout start
running suddenly during mfx registration. – Deactivate the
automatic analog recognition on these locomotives.
The locomotive does not run. – The function "open doors / close
doors" is still active. Turn off the function "close doors"; after
the sound ends the locomotive will run according to the ABV
that has been set.
Disposing
Notes on environmental protection: Products
marked with a trash container with a line through
it may not be disposed of at the end of their useful
life in the normal household trash. They must
be taken to a collection point for the recycling
of electrical and electronic devices. There is a
symbol on the product, the operating instructions, or the packag-
ing to this effect. The materials in these items can be used again
according to this marking. Help us to protect the environment
and conserve resources and bring this device to a correspond-
ing disposal point/dealer free of charge. For disposal-related
queries, contact the organisation responsible for waste disposal
or your specialist retailer.
www.maerklin.com/en/imprint.html
Warranty
The warranty card included with this product specifies the
warranty conditions.
• Please contact your authorized Märklin dealer for repairs or
contact:
U.S. only:
The USA subsidiary
using the contact form
at www.marklin.com.
GB only
Gebr. Märklin & Cie. GmbH
Reparaturservice
Stuttgarter Str. 55 - 57
73033 Göppingen
Germany
Tel: +49 7161 608 222
E-Mail: Service@maerklin.de
47
Advertenties
Hoofdstukken
