Inhoudsopgave
Advertenties
Switching ON / OFF
1: When unit is off, press the "STANDBY" button on the main unit (2) or remote control (21) to switch the unit on.
2: When unit is on, press "STANDBY" button on the main unit (2) or remote control (21) to switch the unit off.
Mute function
1: Press the "MUTE" button on the remote control (21) at any time to silence the output.
2: Press again to resume audio output.
Tone controls
Adjust the Bass & Treble tone controls if required.
1: Press the "TONE" button on the remote control (20).
2: The first adjustment is Bass. Use the "VOLUME +/-" buttons on the remote control (19/22) to adjust.
3: Press the "TONE" button (20) again to edit the Treble. Use the "VOLUME +/-" buttons (19/22) on the remote control to
adjust.
DSP effects
Pressing the DSP button on the remote (17) repeatedly cycles through a set of "EQ" presets to alter the sound field.
Sequence: "Flat > Classic > Rock > Rock > Pop > Jazz"
Switching modes
Press the "FUNCTION" button on the main unit (6) or remote control (2) to cycle through the options. To switch between the
available modes: DAB > FM > BT > AUX IN >CD > USB .
DAB Full Scan
Press the "FUNCTION" (6) button on the main unit or remote control (2) to select "DAB" mode.
In DAB mode, press the "SCAN" button on the main unit or remote control to perform full scan the available DAB stations.
During the scan, the display will show "Searching..." together with a slide bar that indicates the progress of the scan and the
amount of stations that have been found so far. Once the scan has completed, to explore and listen to the found stations, press
the SKIP-/+ button on the main unit (8/12) or remote control (8/10) or rotate the "TUNNING CONTROL" (13), then press
"ENTER" button on the main unit (13) or remote control (9) to confirm.
Manual Tune
You can also manually tune the receiver. This can help when aligning your aerial or when adding stations that were missed
while auto tuning.
1. In DAB mode, press and hold the "ENTER" button on the main unit (13) or remote control (9) for 3 seconds and it will show
MANUAL TUNE.
2. Press the SKIP-/+ button on the main unit (8/12) or remote control (8/10) or rotate the TUNNING CONTROL (13) to cycle
through the DAB channels, which are numbered from 5A to 13F
3. After your desired channel number is reached, press the ENTER button on the main unit (13) or remote control (9) to exit the
manual tune.
To Store the DAB Stations in the Memory
1. In DAB mode, select the DAB station
2. Press and hold the "MEM" button on the remote control (15) for about 3 seconds, the display will show the current DAB
station and "P##" (where "##" is the preset station number) will flash, press the "SKIP-/+" button on the main unit (8/12) or
remote control (8/10) or rotate the "TUNNING CONTROL" (13) select the desired preset station number.
3. Press "ENTER" button on the main unit (13) or remote control (9) to confirm storing that station in memory.
To Recall the Stored DAB Station
1. In DAB mode, press the "MEM" button on the remote control (15), the display will show the current DAB station and P# #
(where ## is the current preset station number),
2. Press the SKIP- / + button on the main unit (8/12) or remote control (8/10) or rotate the "TUNNING CONTROL"(13) to select
the preset station number you want to listen then press "ENTER" (13) button on the main unit or remote control (9) to
confirm.
Prune
You may remove all unavailable stations from the list.
1. In DAB mode, press "MENU" button on the remote control(14), the display appear the software version number ,such as
"DAB305 v 1.1"
2. Press "MENU" button on the remote control (14) once again and will appear "PRUNE?""
3. Press "ENTER" button on the main unit (13) or remote control (9) to confirm.
BASIC OPERATION
DAB MODE
3
NR955 / English Instruction Manual
Advertenties
Inhoudsopgave
