Schedules: Example - Rotex RHYHBH05AA Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor RHYHBH05AA:
- Gebruiksaanwijzing (16 pagina's) ,
- Installatiehandleiding (28 pagina's)
Inhoudsopgave
Advertenties
3 Operation
Example:
T t
1
2
60°C
50°C
45°C
40°C
15°C
00:00
07:00
Using the DHW tank temperature home page
Typical DHW tank temperature home pages
Depending on the user profile, the user interface gives you either a
basic or a detailed home page. Depending on an installer setting,
either an actual temperature or a number of people is displayed to
indicate the domestic hot water tank temperature. The examples in
the illustrations below are in DHW tank mode = Scheduled.
User profile = Basic
To read out and adjust the desired reheat temperature (in
scheduled and reheat mode)
1 Go to [7.4.3.3]:
> User settings > Preset values > Tank
temperature > Reheat.
Result: You can read out the desired reheat temperature.
2 Press
or
to adjust.
To read out and overrule the active or next scheduled desired
temperature (in scheduled mode or scheduled + reheat mode)
1 Go to the DHW tank temperature home page (Tank).
or
Result:
2 Press
or
to overrule. Note: If the desired temperature is
weather dependent, you cannot change it on the home page.
Using the DHW tank booster mode
To activate the DHW tank booster mode (method 1)
1 Go to the DHW tank temperature home page (Tank).
2 Press
for more than 5 seconds.
To activate the DHW tank booster mode (method 2)
Prerequisite: User profile = Detailed
1 Go to the DHW tank temperature home page (Tank).
2 Press
to select .
Operation manual
16
All manuals and user guides at all-guides.com
3
4
14:00
21:00
t
User profile = Detailed
is displayed.
3.5
Schedules: Example
INFORMATION
The procedures to program other controls are similar.
In this example:
▪ Room temperature schedule in heating mode
▪ Monday = Tuesday = Wednesday = Thursday = Friday
▪ Saturday = Sunday
To program the schedule
1 Go to [7.3.1.1]:
> User settings > Set schedules > Room
temp. > Set heating schedule.
2 Select Empty and press
3 Program the schedule for Monday. See below for more details.
4 Copy from Monday to Tuesday, Wednesday, Thursday and
Friday. See below for more details.
5 Program the schedule for Saturday.
6 Copy from Saturday to Sunday.
7 Save the schedule and give it a name. See below for more
details.
To program the schedule for Monday
1 Use
and
to select Monday.
2 Press
to enter the schedule for Monday.
3 Program the schedule for Monday:
▪ Use
and
to select an entry.
▪ Use
and
to change the value of an entry.
To copy from one day to another
1 Select the day from which you want to copy and press
Example: Monday.
2 Select Copy day and press
3 Set the days you want to copy to Yes and press
Tuesday = Yes, Wednesday = Yes, Thursday = Yes and Friday
= Yes.
To save the schedule
1 Press
, select Save schedule and press
2 Select User defined 1, User defined 2 or User defined 3 and
press
.
3 Change the name and press
temperature schedules). Example: MyWeekSchedule
To select which schedule you currently want to use
1 Go to [5]:
> Select schedules.
2 Select for which control you want to use a schedule. Example:
[5.1] Room temperature.
3 Select for which operation mode you want to use a schedule.
Example: [5.1.1] Heating.
4 Select a predefined or user-defined schedule and press
.
.
. Example:
.
. (Only applicable for room
.
RHYHBH05AA + RHYHBH/X08AA
ROTEX HPU hybrid heat pump module
4P353066-1B – 2013.10
.
Advertenties
Hoofdstukken
Inhoudsopgave
