Drainage stopper
The drainage stopper prevents water from flowing out of the
device.
You can unscrew the stopper (3) with a screwdriver so that
the dirty water can drain off. Then put the stopper back into
the opening. Tighten it again so that it seals the drain.
► If you need to send the device to customer service, then
first remove the water from the device.
Spout
The spout can be removed to clean it by turning it clockwise.
Then it must be correctly installed again.
To do this, insert the spout slightly to the left with spout to the front, see picture B, and
then turn it counterclockwise to the right, see picture A.
The spout must not be at the back, incorrect position – see picture C.
15.3 Storage
If the appliance is not used frequently, unplug and clean it, then put back into the original
packing box to avoid that the electrical components from getting humidified or damaged.
16 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for
their functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they
could be detrimental to human health and the environment.
Therefore, do not put your old device into the non-recyclable waste under any
circumstances.
Please note
38