Inhoudsopgave
Advertenties
• Please read the manual carefully before use.
• Inexperienced users, children aged 8 and above and persons with reduced physical or mental capabilities must only use this product under supervision
or after having read or been given instructions on safe use.
• Do not attempt to charge non-rechargeable batteries.
• Do not use the Standard or 14,7 charging program on a Li-Ion battery or the Li-ion charging battery on a lead-acid battery.
• After use, disconnect the mains power before disconnecting from the battery.
• Only use the charger in well-ventilated area and on vented batteries.
• This charger must be repaired by professionals.
• Never intentionally connect the charger incorrectly, even though it is protected against short-circuiting and reverse polarity.
• Do not install the charger in a highly flammable environment.
• Do not charge a damaged battery.
• During charging, batteries may release highly explosive gases. Take care not to have sparks, open flames, cigarettes or similar in the vicinity of the
battery and always ensure sufficient ventilation.
• Battery acid is corrosive and harmful. It damages clothes, metal and varnish. In case of spillage and contact with skin, wash and rinse thoroughly with
water and consult a doctor.
• Lead and other chemicals that are used in batteries are toxic. Wash skin and hands thoroughly after working with batteries.
DEFA WorkshopCharger is based on modern switch-mode technology. This charger represent the latest technology within battery charging and
will give the batteries optimal performance and durability. It is well suited to charge lead/acid, AGM, EFB, GEL and lithium-ion batteries up to
approx. 600 Ah for a unlimited time. The charger can be used with up to 45A parallel consumption at the same time as it charges the batteries.
Read the user guide carefully.Please contact DEFA or a qualified person if you are unsure about how to safely use the charger.
2
Connect red clamp to (+) and black clamp to (-) or the connection point recommended by the vehicle manufacturer. The charger is intended for use with
lead/acid, AGM, EFB, GEL and Lithium batteries. The battery manufacturer's recommendations must always be taken into consideration.
ion and data contained in this document are the exclusive property of DEFA AS/
Connect the DC charging cable to the charger. See C page 3.
Connect the AC mains cable to the charger. Push the power button once. See B, page 2. The charger will start and initialize the pre-analyze process. To
turn of the charger, push the power button again.
NOTE: To make sure the correct charging voltages are applied, the charging cables must not be shortened or made longer.
4
ABOUT THE CHARGER
3
CONTROL PANEL
No.:
(1)
(1)
(2)
(2)
(3)
(3)
(4)
(5)
(6)
(4)
(5)
(7)
(6)
(8)
(7)
(8)
(9)
(9)
GB
SAFETY
USE
4
Function
Error indicator
Charge level indicator 100%
Charge level indicator 80%
Charge level indicator 60%
Charge level indicator 40%
Charge level indicator 0-20%
Lithium-ion charge program
14,7V charge program
Power button
Advertenties
Inhoudsopgave
