Inhoudsopgave
Advertenties
ENGLISH
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and
slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a
weight of 10 times of the unit's weight. Also always use a safety cable that can hold 12 times of the weight of the unit when
installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people and has no
one pass by or under it.
How To Control The Unit
Three ways to operation:
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
A. Master/Slave operation
The unit can be linked together in daisy chain in master/slave mode to perform the great built-in pre-programmed lighting shows
triggered by music.
In Master/Slave mode refer to the DMX settings below:
Master unit: when working at Auto-run or Sound Control mode operation
Slave units: DMX start address MUST be set to d001.
Manual setting mode:
A1 Mode
A2 Mode
A3 Mode
S1 Mode
S2 Mode
S3 Mode
d Mode
L Mode
Auto1 setting (RGBW and LED Gobos)
Auto2 setting (Only RGBW)
Auto3 setting (Only LED Gobos)
Sound active1 setting (RGBW and LED Gobos)
Sound active2 setting (Only RGBW)
Sound active3 setting (Only LED Gobos)
DMX setting.
Under Sound active condition, no music status light OFF - Setting (L 0)
Under Sound active condition, no music status light ON
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
- Setting (L 1)
Advertenties
Inhoudsopgave
