Inhoudsopgave
Advertenties
If the connection cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket. Never use the
tool with a damaged connection cable.
The tool must neither be wet nor used in humid environment.
Do not use the tool near explosive materials (petrol, dilution).
Modifications of the tool are prohibited.
Always check the tool, cable and plug before use. Have damages only
repaired by specialists. Only insert the plug into the socket when the tool
switch is off.
When the machine runs outside, always use a protection switch (30 mA
max.) against fault current.
Pull the plug and switch the machine off if it is not under supervision, e.g.
in case of setting up and stripping down the machine, in case of voltage
drop or when fixing or mounting an accessory.
Switch the machine off if it stops for whatever reason. This way, you
avoid that it starts suddenly and not under supervision.
Do not use the machine if one part of the housing is damaged or in case
of damages on the switch, cable or plug.
Electric tools have to be inspected by a specialist in regular intervals.
Do not touch rotating parts.
Persons under 16 years of age are not allowed to use the tool.
Before starting up, check that the mixing rod is securely attached and
rotates without a hitch.
Do not reach into the mixing container with your hands or insert any
other objects into it while mixing is in progress. Risk of crushing!
Wait until the machine or tool comes to a complete standstill. Rotating
tools can snag and cause injuries or damage.
When working with this machine wear ear protectors, goggles, dust
mask and protective gloves.
During use, always hold the machine with both hands and maintain
a safe standing position. Start up and run down the machine in the
mixing container only. Pay attention to the reaction moment of the
machine.
For further safety instructions, please refer to the enclosure.
Before starting the machine check the correspondence between voltage and
frequency according to the data mentioned on the identification plate.
Electrical Connection
12
Advertenties
Inhoudsopgave
