Advertenties
Beschikbare talen
Beschikbare talen
WiZ Pro MASTER STATION
CODES : 45901 - 45902
WARNING: The installation must be carried out by qualified persons in accordance with the standards and regulations in force. It is recalled that the decision to install the products in an environment compatible and in compliance with the standards and good practices is the full responsibility of the
EN
buyer and the installer. Read and follow the instructions before installing, powering on or using the products. We do not accept any liability resulting from improper implementation or installation of the products.
The devices must not be modified, even partially, otherwise the warranty will not apply.
1. TECHNICAL SPECIFICATIONS
Purpose: Wall control for WIZ products
Material: polycarbonate
Battery type: lithium-ion
Signal transmission: Wifi 2.4GHz
Operating temperatures: -10°C/+45°C
2. CONTENTS
x1 wall control containing a rechargeable 3.7V lithium-ion battery with a capacity of 280mAh
3. INSTALLATION
1
Ensure that the surface where the control will be mounted is clean, dry and free
of grease.
2
Separate the wall control from its
mounting plate. Remove the protective
covers from the adhesive strips. Posi-
tion the plate in the desired location.
3
Attach the wall control to its base.
EUROPOLE - 19, avenue ZAC de Chassagne - 69360 TERNAY - Fax : +33 (0)4 72 24 73 42 - www.europole.net
4. PAIRING
Ensure that you have a sufficient charge level. Open the WiZ app. Manually add the product type
'wall controller'. When prompted by the app, press the ON button 3 times. The product will be
added to the app.
5. FEATURES
A
C
E
H
Refe-
Name
Purpose
rence
A
ON / Dimming +
ON / Dimming
B
OFF / Dimming -
OFF / Dimming
C-F
Scene 1 to 4 or Nightlight mode
Input keypad
G
Type C USB port
Charging port
H
LED indicators
Charging indicators
The average charging time is 4 hours with a charging current of 100mA.
When fully charged, the product can be used for 150 days before recharging, at an average
rate of 30 presses per day on the keypad.
During charging, the indicator light is red. When the product is fully charged, the indicator light
turns green.
6. PRECAUTIONS
This WIZ product only works in a WIZ ecosystem. It is not compatible with the Philips HUE
solution.
B
This product does not physically cut off the power to appliances. Be sure only to handle
products that are powered off.
7. MAINTENANCE
D
Clean with a dry cloth.
F
G
Notes
Short press / Long press
Short press / Long press
-
USB 5V
Green or red
2
Advertenties
