Advertenties
Setting the Clock
1. With the unit OFF, press and hold the STOP/CLOCK button until the display flashes.
2. Press the <<I or I>>buttons to adjust the hours
3. Press the Stop/CLOCK button to set.
4. Press the <<I or I>>to adjust the minutes,
5. Press the Stop/CLOCK button to finish setting the time.
Setting the Alarm
1. Be sure the clock is in off mode. Press and hold the AL1 button until the display starts to flash.
Press the <<I or I>> buttons to select the preferred alarm tone : buzzer (bb),CD (Cd) or the FM radio (88.0).
Then Press the AL1 to confirm the setting.
If you selected the FM radio you first should have done a full scan (See the FM radio part), press the
-
<<I or I>> buttons to select one of the stored presets/frequencies and press AL1 to confirm. Set the
alarm hours with the <<I or I>> buttons, press AL1 to confirm. Now you can set the minutes with the
<<I or I>> buttons, press AL1 to confirm. The alarm configuration is done (you'll see the current time
on the display).
If using the CD player be sure a CD is loaded in the unit, press the <<I or I>>buttons to select the CD
-
track. Set the alarm hours with the <<I or I>> buttons, press AL1 to confirm. Now you can set the
minutes with the <<I or I>> buttons, press AL1 to confirm. The alarm configuration is done (you'll see
the current time on the display).
If using the Clock "bb" sound (buzzer). Set the alarm hours with the <<I or I>> buttons, press AL1 to
-
confirm. Now you can set the minutes with the <<I or I>> buttons, press AL1 to confirm. The alarm
configuration is done (you'll see the current time on the display).
Repeat the above instruction to configure AL2.
-
Once the configured alarm time has been reached, the alarm will sound. Press the SNOOZE button to stop the
alarm sound for 9 minutes. To stop the alarm/snooze mode, press the AL1, AL2 or On/Off button.
2. If you are using CD mode as alarm sound, you can choose a music track between 1 and 30. If you select a
track beyond track 30 then track 1 will be used.
CD player
Note: this unit is not compatible with MP3 CDs.
Turn on the unit and press the SOURCE button to CD mode.
1. Open the CD door and insert the disc (label side up) and close the CD door.
Several seconds after closing the door, it will automatically play the first track; LED display shows the
number of tracks for a short time, then it will show the actual time again.
2. Use the volume dial to set the desired volume level.
3. Press the <<I or I>> buttons to play next track or previous track. And hold <<I or I>> buttons to fast
forward/backward the CD tracks.
4. Press the "Play/Pause" button to pause and playing the loaded CD.
6
Advertenties
