Inhoudsopgave
Advertenties
eNet
Radiografische handzender met Togglefunctie, 1-kanaals
6.1 Technische gegevens
Nominale spanning
Batterijtype
Omgevingstemperatuur
Beschermingsgraad
Afmeting L×B×H
Radiofrequentie
Zendvermogen
Zenderbereik in vrije veld
6.2 Parameterlijst
Settings window
Device settings
Parameter name
Manual commissioning
Channel 1
Settings, channel/scene
Parameter name
Local Operation
Manual commissioning
Sum status / transmission
repetitions
82582503
J:0082582503
Setting options, Basic set-
ting
On, Off
Basic setting: On
Rocker switch, scene
Basic setting: Rocker switch
Setting options, Basic set-
ting
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off/Transmit 2x...11x,
Off/Transmit 4x (without con-
nection)
Basic setting: On
5/6
1 lithium CR 2450N
-5 ... +45 °C
55×40,5×15 mm
max. 20 mW
Explanations
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device can-
not be reset to the factory set-
ting.
Setting the buttons of the
channel as channel buttons
(rocker switch) or scene but-
tons (scene).
Explanations
Blocks the device channel for
local operation.
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device can-
not be reset to the factory set-
ting.
On: The transmitter evaluates
the received status messages
and displays them as an over-
all status. If individual status
messages fail, then the trans-
mitter will repeat its telegram
up to three times. Off/Transmit
x times: The evaluation and
display of the overall status is
deactivated. The number of
telegram repetitions is prescri-
bed. In this setting, no trans-
mission errors are displayed.
Off/Transmit 4x (without con-
nection): Reserved for sensors
which transmit without a con-
nection.
DC 3 V
IP 20
868.3 MHz
typ. 100 m
13.03.2014
Advertenties
Inhoudsopgave
