Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. Rear wheel
4. Exhaust filter grill
7. Dustbag-full indicator
148 mm
1x hose
1. To fit the hose, push the hose end into the hose socket and turn it clockwise until
2. To connect the tubes to the handgrip of the hose, insert the narrow section into
3. Connect a brush suitable for the floor type to be cleaned. The hard floor brush
4. Hold the mains plug and pull the retractable mains cable out of the vacuum
5. Press the ON/OFF button on the top of the vacuum cleaner to turn it on (see Fig.8)
PRODUCT OVERIEW
5
6
7
8
9
2. Power cable
5. Speed Control
8. Dust cover
BIJGEVOEGDE LIJST
1x metal Tube
1x main brush
OPERATIONS
it locks into place (see Fig 1).
To remove the hose, hold the hose end and turn it anticlockwise (see Fig. 2).
the wider section while turning a little (see Fig 3). Connect the two tubes together,
insert the narrow section into the wider section while turning a little.
can be used with brush strips lowered or raised (see Fig 4 and 5). Yo u may also
connect the integrated brush and nozzle to vacuum sofa, wall surface, curtain,
corners, slots or grooves (see Fig 6).
cleaner. Connect it to the mains socket. The YELLOW mark indicates the ideal
length to extend the cable. Do not extend the mains cable beyond the RED mark
which indicates the maximum length.
Turn the speed control to select your desired suction power.
HINT: To move the vacuum cleaner from room to room, you can unplug and carry
it by either the handle or the handgrip. Never use the mains cable to pull the
vacuum cleaner.
105 mm
4
3
2
1
3. ON/OFF button
6. Cable rewind button
9. Lock clip
1x parquet nozzle
9
1x 2 in 1 brush
Advertenties
Inhoudsopgave
