Inhoudsopgave
Advertenties
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to
drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains
voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must
also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
OPENING THE LID
Slide the locking handle to the inside, unlocking the lid. Turn over the lid to expose the control panel and column storage.
OVERVIEW
1. BT PAIR
Press to make BT streaming connection possible. When pressed, the VX820 is
findable on the streaming device.
2. LINK (TWS/STEREO PAIRING)
When having two VX820 column speaker systems, it's possible to initiate a link
(pairing) between the two by pressing this button on both systems. Both portable
systems will be emitting the same signal from the streaming audio function.
3. DSP PRESETS
Press to switch between presets (main, hifi, monitor, dj and speech).
4. MASTER LEVEL
Rotate to adjust the master output level.
5. TREBLE
Rotate to adjust the treble (high tones) level of the corresponding channel.
6. BASS
Rotate to adjust the bass (low tones) level of the corresponding channel.
7. CHANNEL VOLUME
Rotate to adjust the channel output volume level.
8. INPUT SWITCH
Toggle switch to change between different inputs for channel 1 and 2 (mic, guitar
and line).
9. CHANNEL 1 AND 2 INPUT
XLR and 6.3mm combo jack input connectors for connecting microphones,
guitars or to use as line input.
10. LINE/BT SWITCH
Press to toggle between line- and BT input modes.
11. CHANNEL 3/4 INPUT
RCA line input sockets for channel 3 and 4.
12. AUX INPUT
3.5mm auxiliary input jack to connect an external audio device (CD- or MP3 players, etc.).
13. MIX OUTPUT
XLR mix ouput socket.
14. POWER INPUT
Socket for plugging in the supplied power cord.
15. POWER SWITCH
Press to turn the device on/off.
3
Advertenties
Inhoudsopgave
