Inhoudsopgave
Advertenties
• Never stand directly over blender when it is being started or while it
is running.
NOTE: The MX1300XTEE/EK does not include a Sound Enclosure.
The MX1500XTSEE/SEK is equipped with a heavy-duty polycarbonate sound
enclosure to reduce noise level while blending. This sound enclosure is
removable and dishwasher safe.
To remove the sound enclosure, follow these steps:
1. Open sound enclosure and remove blender container.
2. Remove rubber jar pad.
3. Remove 3 screws from blender base and remove sound enclosure.
NOTE: To replace sound enclosure, follow above steps in reverse.
Whether your blender is in Standby mode, new Programming mode, or the
motor is running, pressing the STANDBY
running and will turn the power off.
NOTE: All programs and current settings will be restored next time you turn
unit on.
THE BLENDER CONTAINER MUST BE CLEANED AND DRIED AFTER EACH
USE ACCORDING TO THE FOLLOWING INSTRUCTIONS. FAILURE TO DO
SO MAY ALLOW RESIDUES OF PROCESSED MATERIAL TO COLLECT ON
THE INTERNAL SEALS OF THE BLADE ASSEMBLY, RENDERING THEM
INEFFECTIVE.
• Wash, rinse, sanitize and dry container prior to initial use and whenever it
will not be used again within a period of 1 hour.
• Wash and rinse container after each use.
• Clean and sanitize motor base prior to initial use and after each use.
• Washing solutions based on non-sudsing detergents and chlorine-based
sanitizing solutions having a minimum chlorine concentration of 100 PPM
are recommended.
The following washing, rinsing, and sanitizing solutions or their equivalents
may be used.
SOLUTION
Washing
Diversol BX/a or CX/A
Rinsing
Sanitizing
SOUND ENCLOSURE
TURNING OFF YOUR BLENDER
CLEANING AND SANITIZING INSTRUCTIONS
PRODUCT
Diversy Wyandotte
Plain Water
Clorox
®
Institutional Bleach
button will stop the unit from
DILUTION IN WATER TEMPERATURE
4 Tablespoons
/Gallon
1 Tablespoon/Gallon
8
Hot 115˚F (46˚C)
Warm 95˚F (35˚C)
Cold 50-70˚F
(10-21˚C)
Advertenties
Inhoudsopgave
