Inhoudsopgave
Advertenties
Financial Service
View the stock index from around the world.
System Information
Check out the version of the system, and the details of connected network. The
information includes MAC address which you are required to fill in with registration
of my mediaU membership.
TROUBLESHOOTING
Problem
Solution
The device does not
• Check if the power adaptor is connected properly.
switch on.
• The device may malfunction when used in areas
with strong radio interference. The device will work
properly again once there is no more interference.
No sound.
• Turn on the sound as it may be muted
• Increase the volume.
No network connection
• Check the WLAN function.
can be established.
• Try to set an IP address at the device.
• Activate the DHCP function on the router and make
the connection again at the device.
• A firewall is activated on the network – set the respective
program in such a way that access is possible.
• Reboot the unit to try again.
WLAN connection
• Check the availability of WLAN network on the
cannot be established.
access point.
• Place the device closer to the router.
• Make sure the WEP/WPA password is correct.
All manuals and user guides at all-guides.com
Problem
No station is found.
Noise in FM mode.
Alarm does not work.
Unable to do DLNA
streaming.
System freezes
suddenly.
Instruction Manual
Solution
• Check the network as well as the access point and
firewall.
• The station may not be available currently, try it
again later or select another station.
• The link of the station is changed or the station no
longer transmits – ask the provider for information.
• The link of a manually added station is not correct,
make sure it is correct and re-enter if needed.
• Check/move the FM antenna.
• Move the radio.
• Switch on the alarm.
• When there is no sound, refer to the solutions of "No
sound".
• The source of alarm was set to a station but there is
no network connection. Change the source of alarm
or reconfigure the connection.
• Check the connection of the network, both devices
need to be in the same network; and test if the
network is in good condition.
• Make sure the settings on your device are correct.
• The radio is overloaded, reboot the unit.
• The device may malfunction when used in areas
with strong radio interference. The device will work
properly again once there is no more interference.
EN
11
Advertenties
Inhoudsopgave
