Inhoudsopgave
Advertenties
1. Disconnect the building-side connecting
cable from the power supply and secure it
against being switched on again. To do
this, trip the corresponding circuit breaker
of the house installation.
2. Loosen the screws (1) and remove the
mounting plate (2).
3. Guide the building-side connection
cable through the mounting plate and the
cover of the connection box as shown in
Figure 1. Connect the connection cable to
the luster terminal as shown in Figure 2
and seal it in the connection box (3).
4. Now mount the mounting plate on firm
ground or with a ground spike using the
enclosed screws and dowels (4).
5. Place the socket outlet pillar on the
mounting plate and fix it in place using the
screws (1).
6. Turn the power back on. The installation
is completed.
Subject to technical changes
English
Figure 1
Socket column (LC-SS-9199) - Assembly instructions
07/2024
Advertenties
Inhoudsopgave
