Inhoudsopgave
Advertenties
PerfectView SWITCH200VTO
5.1
Connections
The control box has the following connections:
No. in
Connection description
fig. 5, page 5
1
Red cable: connection to 12 V to 34 V positive (e.g. connected posi-
tive terminal, terminal 15)
2
Black cable: connection to earth (terminal 31)
3
Green control cable (+ signal) for connecting the positive cable of the
reversing light
When you shift into reverse gear, the control box is activated via this
cable.
4
Yellow control cable (+ signal, video trigger out) with AMP Quadlok
plug contact for controlling the camera activation signal of lorry multi-
media systems
When the camera input is active, this signal has a level of +7.5 V.
When the camera input is switched off, it is switched to earth.
5
Connection of the rocker switch supplied for switching between the
two camera inputs manually.
6
Dip switch for mirroring the camera image manually and for switching
between long-distance and close-up manually (provided the camera
supports this function)
7
Camera input 1
8
Camera input 2 with trailer detection
9
Potentiometer for adjusting the delay between the video signal and
video trigger signal (0.8 s to approx. 3 s)
10
Audio output for connecting to audio inputs using a cinch connector
11
Video output (cinch socket) for connecting...
diverse multimedia navigation systems and lorry monitors in
another monitor with a video input (cinch socket) or a video
EN
All manuals and user guides at all-guides.com
combination with the corresponding adapter
recorder.
Technical description
21
Advertenties
Hoofdstukken
Inhoudsopgave
