Inhoudsopgave
Advertenties
First, charge the gamepad's integrated batteries: using the mini-
USB cable, connect the gamepad to any free USB port on the PC
or another USB power source (at least 500mA). The gamepad's
upper-right LED will flash during charging which takes up to 3
hours; be aware, the initial charge may take longer. As soon as
the LED stays lit, charging is complete and you can disconnect the
Download the driver to install the XEOX software. Always use the
latest driver version. To download it, go to www.speedlink.com/
support. You will need to install the driver to use the vibration
Plug the USB receiver into a free USB port on your PC. The
operating system will detect the device automatically and it will
be ready to use a few seconds after that.
If the gamepad is switched off, press and hold the HOME button
for three seconds to switch it on. Following that, the gamepad's
When you first use the gamepad, press the HOME button again
to establish the connection to the PC. When doing so, place the
gamepad near the receiver. The connection process takes a few
seconds and will take place automatically from now on when the
gamepad is switched on. The upper-left LED will remain lit if the
connection has been established successfully.
1. CHARGING
2. DRIVER INSTALLATION
function with some games.
3. CONNECTING
4. WIRELESS CONNECTION
upper-left LED will start to flash.
EN
cable.
Advertenties
Inhoudsopgave
