Inhoudsopgave
Advertenties
ENGLISH
24
basis of its output voltage in idling conditions.
When working in small or hot rooms, insulating bases
and interim layers, as well as gauntlets made from
leather or other non-conductive materials, are to be
used to insulate the body against the fl oor, walls,
conductive parts of the device and similar.
Protective clothing
Caution! Risk of accident due to spraying
sparks
The spraying cutting sparks may lead to painful
burn injuries.
Therefore, always observe the following instruc-
tions:
• Always wear a leather apron.
• Use leather gloves.
• Wear suitable head protection when cutting
overhead.
• Ensure that your trouser legs cover the tops of
your shoes.
• Wear sturdy, insulating footwear.
Whilst working, the welder's entire body must be
protected against radiation and burns by means of
the clothing and face protection.
Gauntlets made from a suitable material (leather)
must be worn on both hands. These must not be
damaged.
Special welding gloves to be worn at all times.
Suitable aprons must be worn to protect the clothing
against fl ying sparks and burns. If the nature of the
work, e.g. overhead welding, requires this, a protec-
tive suit must worn and, where necessary, this must
also include suitable head protection.
The protective clothing which is used, as well as all
the accessories, must be compliant with the "Per-
sonal Protective Equipment" Directive (2016/425).
SYMBOLS
WARNING/CAUTION!
Ground before use
WARNING
tions to reduce the risk of injury.
Use a welding mask!
All manuals and user guides at all-guides.com
-
Read the operating instruc-
Class H
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Special welding gloves to be worn at all
times.
Wear safety cut through resistant shoes
with safety sole and steel toe !
Protective apron to be used
Unplug the machine before any work
on it.
Wear dust mask
Warning against hot surfaces!
Warning against dangerous voltage
The appliance must be stored in a dry place and
protected from frost.
Keep the machine out of reach of children.
Never expose tool to rain.
GPS 40A
Plasma arc cutting
370V
370V
Suitable for welding with an increased
GPS 40A
electric risk.
10A/84V
40A/26V
Single-phase alternating current with
Class H
rated frequency of 50-60 Hz
Class H
40A
25.8A
370V
96V
90.3V
10A/84V
Direct Current
30A
40A
370V
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
96V
Fan
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
30A
Artikelnummer: 20063
Baujahr: 2017
Class H
Seriennummer:
Artikelnummer: 20063
Baujahr: 2017
Seriennummer:
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Warning against toxic fumes!
GPS 40A
GPS 40A
Single Phase Output
Static Frequency Converter
Rectifi er
10A/84V
40A/26V
10A/84V
40A/26V
40A
25.8A
20A
40A
25.8A
96V
90.3V
88V
96V
90.3V
30A
15A
30A
15A
20A
Artikelnummer: 20063
Baujahr: 2017
Artikelnummer: 20063
Seriennummer:
88V
40A/26V
Baujahr: 2017
Seriennummer:
15A
25.8A
20A
90.3V
88V
15A
20A
88V
Advertenties
Inhoudsopgave
