Inhoudsopgave
Advertenties
This allows the Direct Universal Transmitter to be connected to low- voltage systems,
like e.g. doorbell circuits. If in doubt, contact a technician!
Warning:
The input is only designed for the connection to low-voltage circuits. The input voltage
must not exceed 15 V!
Never connect the thin cable directly to 230 V mains voltage!
This could endanger your life and destroy the transmitter!
Connecting alarm accessories
Connection socket #2 is intended for the connection of alarm accessories having a
closed-circuit contact. (A closed circuit triggers the alarm).
Therefore it is possible to connect the Direct Universal Transmitter with accessories
like contact-floormats, window contacts as well as switched outputs of alarm systems.
Suitable alarm accessories:
- Alarm floor mat (A-2921-S)
Plug the cable of the alarm floor mat directly into socket #2 of the transmitter. Place
the alarm floor mat under the door mat or carpet.
- Water-alarm-sensor (A-2924-S)
Connect the water alarm sensor with socket #2 of the transmitter. It can be used for
allmost all liquids. Place the sensor with the supplied double-sided adhesive tape
in such a way that the two contacts touch the floor. As soon as a liquid touches the
contacts, the alarm is triggered.
After connecting the desired accessory, you may wish to pair the transmitter with the
receivers within the setup, indicating an according icon.
Power supply connection:
The A-2690-W power supply unit, which is available as an accessory, can be connec-
ted to the 7.5 V DC connection socket. However, it is advisable to have operational
batteries in the device, as these serve as an emergency power supply in the event
of a power failure.
English 18
Advertenties
Inhoudsopgave
