Inhoudsopgave
Advertenties
EN
determined which will always be between a Tminimum=40°C and a maximum temperature that is set by the user
(by default, the maximum temperature is equal to the value shown in the data sheet [Attachment A])
- Press the ECO key for long for the eco LED to flash for about 4 s and the learning process restarts (from the first
week). This is used to delete the user demand from the memory and restart (hard reset).
- Caution: when the ECO key is on and the "+/-" keys (Fig.6) or the knob (Fig.6) or the "ECO" key itself are pressed,
the Eco soft mode described above is accessed (the ECO key goes off)
In order to guarantee proper ECO operation, it is recommended not to disconnect the product from the mains.
Anti-limescale Function:
If much limescale is detected, the product switches to limited mode, which is actually "manual" mode with the heating
temperature set to 65°C and the ECO EVO function disabled.
Warning: the first 3 heating LEDs flash simultaneously (Fig.6 1;2;3)
USEFUL HINTS
If the water delivery is cold, have the following checked:
- is there power to the thermostat and terminal block?
- are the heating elements working?
If the water is boiling hot (steam is coming out of the taps)
Shut off electrical power to the appliance and have the following checked:
- thermostat;
- the amount of scale on the boiler and heating element.
If the hot water delivery is insufficient, have the following checked:
- the mains water pressure;
- the condition of the deflector on the cold water intake pipe;
- the condition of the hot water pipe;
- the electrical equipment.
Water leaking from the overpressure safety device
It is normal that some water drip from the device while the water is being heated. To prevent this dripping, install an
expansion vessel on the delivery side. If the device continues leaking even while the water is not being heated, have
the following checked:
- the device's setting;
- the mains water pressure.
Caution: Never obstruct the device's outlet!
NEVER ATTEMPT TO REPAIR THE APPLIANCE YOURSELF - ALWAYS HAVE THIS DONE BY A
QUALIFIED TECHNICIAN.
The indicated data and specifications are not binding; the manufacturer reserves the right to modify them
at his own discretion notification or replacement.
This product is in conformity with REACH regulations.
Pursuant to Art. 26 of Italian Legislative Decree 14 march 2014, n. 49 "Enactment of Directive 2012/19/EU governing
electrical and electronic waste (WEEE)"
The barred bin symbol on the appliance and its packaging indicates that the product must be scrapped separately from other waste
at the end of its service life. The user must therefore hand the equipment over to a sorted waste disposal facility for electro-technical
and electronic equipment at the end of its service life.
Alternatively, he may return the equipment to the retailer at the time of purchase of a new equivalent type of appliance. Electronic
equipment of size less than 25 cm can be handed over to any electronics equipment retailer whose sales area is at least 400 m
disposal free of charge and without any obligation to purchase new product.
Sorted waste collection for recycling, treatment and environmentally compatible scrapping contributes to the prevention of damage to
the environment and promotes reuse/recycling.
22
2
for
Advertenties
Inhoudsopgave
