Inhoudsopgave
Advertenties
Do not recharge a fully charged battery pack!
Protect battery packs from water and moisture!
Do not expose battery packs to naked flame!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short-circuit battery packs!
Slightly acidic, flammable fluid may leak from defective Li-ion battery packs!
If battery fluid leaks out and comes into contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks out and comes into contact with your eyes,
wash them with clean water and seek medical attention immediately!
Transporting li-ion battery packs: The shipping of li-ion battery packs is subject to laws relat-
ing to the carriage of hazardous goods (UN 3480 and UN 3481). Inform yourself of the currently
valid specifications when shipping li-ion battery packs. If necessary, consult your freight for-
warder. Certified packaging is available from ROTHENBERGER.
2
Technical data ROMAX Compact TT
Battery voltage .....................................................................
Battery capacity. ..................................................................
Rated power consumption ...................................................
Motor speed. ........................................................................
Maximum piston force ..........................................................
Pressing time (according to nominal size) ............................
Dimensions (L x W x H) .......................................................
Weight (without battery) .......................................................
Working range. (system- dependent) ...................................
Application temperature range .............................................
Operating mode ...................................................................
Sound pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
Measured values determined in accordance with EN 62841-1.
Vibration total value .............................................................
The Vibration Total Value quoted in these instructions and the quoted noise emission values
were measured according to standardized measurement procedures and can be used to com-
pare one electric power tool with another. They can also be used to make an initial estimate of
the loading.
The quoted vibration and noise emissions can vary during actual use of the electric
power tool dependent on the way in which the electric power tool is used, in particular
what type of workpiece is being processed.
Establish additional safety measures to protect the operator which are based upon an
estimate of the vibration loading during the actual usage conditions (in doing so taking
account of parts of the operating cycle, for example times in which the electric power
tool is switched and those in which it is switched on but not running under load).
) ...................................................
pA
) ......................................................
WA
ENGLISH
18 V
2,0 Ah / 4,0 Ah
281 W
-1
20400 min
19-21 kN
ca. 3 s
336 x 143 x 76 mm
ca. 2,1 kg
Ø 12 – 40 mm
-10 – 60°C / 14 – 140°F
S3
78 dB (A) ¦ K
3 dB (A)
pA
89 dB (A) ¦ K
3 dB (A)
WA
≤ 2,5 m/s
2
¦ K= 1,5m/s
2
17
Advertenties
Hoofdstukken
Inhoudsopgave
