Inhoudsopgave
Advertenties
Man Body Groomer Use Instructions
Description of the product: Fig.A
1. Shaving head
2. Adaptor
3. ON/OFF button
4. Charging light
5. Lubrication Oil
6. Back shaving extension
7. Charging base
8. Trimming comb 1 (3mm )
9. Trimming comb 2 (5 mm)
10. Trimming comb 3 (7mm)
11. Cleaning brush
Before using
Before using the product, charge it completely, making sure it is switched off.
To charge fully the product will take approx. 3 hours.
To avoid damaging or compromising battery operation, do not charge it in places with temperatures below 10 °
C or higher than 30 ° C.
Check always the integrity of the shaving head and of trimming combs before use.
Put the product in the charging base, insert the adapter into the charging base, and connect it to the power outlet.
If the product is properly placed the charging light will turn and remain red until the charge is completed, when
the light becomes green.
At this point, disconnect the adapter from the power outlet and from charging base.
The product fully charged will have an operating autonomy of about 60 minutes.
Operation
Trimming
The product is equipped with 3 different trimming combs. Depending on the desired cutting length, choose the
appropriate trimming combs.
If you are trimming your body hair for the first time, take care to do slow and delicate movements and to use the
longer trimming comb (7mm).
Trimming with body hair and skin dry, is definitely easier and more effective.
Place the desired trimming combs over the shaving head, making sure that the tips will point in the same direc-
tion you are moving the product. (if you want to shave from top to bottom to make the tips turn to yourself, and
contrary)
Set the power button to ON.
Start moving the product with slow and delicate movements, making sure that the shaving direction is opposite
to the hair growth. Also make sure that product and skin will stay in contact.
Caution: Not all hairs grow in the same direction, so you may need to change the direction of use
several times while using the appliance.
Turn off the product by setting the button on OFF.
Shaving
Do not use this product to shave or cut facial or scalp hair.
While shaving sensitive areas for the first time, you may feel discomfort, irritation or redness of the skin. This is
normal because the skin needs time to adjust the shaving.
If the hairs are longer than 10mm, for optimal shaving results use the trimming comb n.1 at a length of 3mm.
Otherwise, not need to apply any regulator.
For dry use, make sure the skin is clean and dry before using the product.
For use with wet skin, you can treat the skin with soap or shaving foam before using the product.
For better shaving result and to minimize shaving head wear, make sure that product is in total contact with the
skin, without pressing too much as excessive pressure can cause skin irritation.
Set the power button to ON.
Start moving the product with slow and delicate movements, making sure that the shaving direction is opposite
to the hair growth. With your free hand stretch the skin so that it will be smoother.
9
EN
Advertenties
Inhoudsopgave
