Inhoudsopgave
Advertenties
7.3.5 ADVANCE
Use the advanced setup menu to configure alarm settings, motion detection, mobile surveillance, PTZ
settings and network settings. The advanced setup menu contains the following sub-menus: Alarm,
Info, MD, Mobile, System, PTZ, and Network.
7.3.5.1 ALARM
Use the Alarm menu to configure alarm and email settings.
I/O Alarm: each channel has one I/O alarm. When an alarm is triggered the corresponding channel
will start alarm record.
NO (Normal Open, when alarm in, close)
OFF (Normal Closed, when alarm in, open)
HDD LOSS: The alarm will sound if the internal HDD is damaged. The live screen will show [H].
HDD SPACE: when the space less then 500MB, the live screen will show 'not enough space'. Clear
data or replace HDD.
VIDEO LOSS: when a camera is disconnected, the live screen will show 'video loss'.
ALARM MANAGE:
•
alarm output: set the time of alarm output: 0, 10, 20, 40 or 60 seconds.
•
Buzz: set the time of buzz: 0, 10, 20, 40 or 60 seconds.
•
post record: set the record time after alarm: 30 Sec, 1, 2 or 5 Min.
EMAIL SETUP:
The system can send an email notification with a JPEG snapshot for triggered events on the system
every 3 minutes.
To setup email notification:
1) Under EMAIL, select ON.
2) Under SSL, select OFF.
NOTE: SSL deals with encryption. Only advanced users should enable this option.
26/05/2011
CCTVSET10
13
© Velleman nv
Advertenties
Inhoudsopgave
