Inhoudsopgave
Advertenties
EN-2
3. OPERATION
•
Press the ON/OFF button.
•
Wait until "0.00 is displayed
•
Put the object or sample on the weighing platform
•
Use the MODE key to switch between weight units
Tare Weighing
•
Turn on the scale as described in OPERATION
•
Place the "tare item" (weighing container) on the weighing platform
•
Press TARE and wait until "0.00" is displayed
•
Add the "sample" into or on the weighing container.
4. MAINTENANCE
4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
4.2 Troubleshooting
For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.
5. TECHNICAL DATA
Typical specifications:
For product specifications, please refer to the full Instruction Manual downloaded from
6. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark
Standard
This product complies with the EU Directives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU
(NAWI). The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
AS/NZS 61000.6.1, AS/NZS 61000.6.3
YA SERIES SCALES
www.ohaus.com.
Advertenties
Inhoudsopgave
