Inhoudsopgave
Advertenties
EN
Turn on
•
Turn on the power using the green switch
(Fig 4). Switch will illuminate when machine is
on.
•
Set the thermostat to the required temperature
(Fig 5).
Dispensing the product
Warning: The products
dispensed from the machine can
be hot please take care to avoid
risk of scalding.
•
Place a suitable cup beneath the tap.
•
Push or pull the lever on the tap until the
required amount of product has been poured into
the cup (Fig 6).
4
CN219_ML_A5_v4_20241030.indb 4
CN219_ML_A5_v4_20241030.indb 4
•
Release the tap lever so that the product stops
pouring.
•
If the product to be dispensed is especially
thick pull the tap Rod out to the maximum
position (Fig 7).
•
Any clogging in the dispensing line may be
removed by sliding the tap rod back and forth
(Fig 7).
Warning: Never touch the bowl
or lid while the machine is
operating, since they are very
hot; always use the handle
when moving the bowl lid.
Cleaning, care and
Maintenance
Emptying the bowl
Before cleaning out the bowl, it is first necessary to
empty out any product inside it.
•
With the machine switched on, empty out all of
the product still inside the bowl, using the lever
on the tap (Fig 8).
Warning: the product dispensed
from the machine has a very
high temperature; risk of
scalding.
2024/10/30 15:28
2024/10/30 15:28
Advertenties
Inhoudsopgave
