Download Inhoudsopgave Inhoud Print deze pagina

Wall Mounting; Adhesive Mounting - Hama 2K121665 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

5.3 Wall mounting

Use screws and wall anchors (not included in the delivery
package) to attach the bracket to the wall. Insert the
antenna into the slots provided.
Note
• Before mounting, check that the wall you have chosen
is suitable for the weight to be mounted Also make
sure that there are no electric, water, gas or other lines
running through the wall at the mounting site.
• After the product has been mounted, check that it
is su ciently secure. You should repeat this check at
regular intervals.

5.4 Adhesive mounting

Please note that the chosen mounting surface (for
example, window, mirror) should be free of dust and
grease. Use a suitable cleaning agent from a specialised
dealer to clean the surface.
Remove the protective lm from the adhesive pad and
press it onto the rear side of the antenna for a few
seconds. Now remove the other protective lm from the
adhesive pad and gently press it with the antenna onto the
chosen mounting surface.
Note
• Wait at least 24 hours after installing the adhesive pad
before attaching the holder.
• Note that the adhesive pad is permanently attached.
To remove the adhesive pad, carefully pull it off the
installation surface. The adhesive pad can only be
attached again using suitable adhesive material
available from specialised dealers.
• Various environmental factors such as ambient humidity,
sunlight or cold can impair the durability of the adhesive
pad.
• We cannot guarantee that residue will not be left
on the mounting surface after the adhesive pad is
removed.
5.5 Setting up the antenna on a table, cabinet or
similar
Next, place the antenna on an even surface such as a table
or entertainment stand. Check the reception quality. If the
reception quality is not good, adjust the position or angle
of the antenna.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth
and do not use aggressive cleaning agents.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here:
www.hama.com
9. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and
electronic devices as well as batteries must not be
disposed of with household waste. Consumers are obliged
by law to return electrical and electronic devices as well as
batteries at the end of their service lives to the public
collecting points set up for this purpose or point of sale.
Details to this are de ned by the national law of the
respective country. This symbol on the product, the
instruction manual or the package indicates that a product
is subject to these regulations. By recycling, reusing the
materials or other forms of utilising old devices/batteries,
you are making an important contribution to protecting our
environment.
10. Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that the
radio equipment type [2K121665] is in compliance
with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following
internet address:
www.hama.com -> 2K121665 -> Downloads.
3

Advertenties

Inhoudsopgave
loading

Inhoudsopgave