Inhoudsopgave
Advertenties
Technical Specifications
220-240V ~ 50Hz 100W.
Drawing of the device
Schéma 1
1
Lid
Removable heating pot
2
3
Heating tank with adjustable temperature
Automatic stop and start function
Schéma 3
Back of the device – plug for the device cable.
Cleaning and maintenance
1. Turn off the unit and unplug it.
2. To clean the outside of the heating vessel, you can use a soft, damp cloth.
3. Never use abrasive agents or solvents.
Note: We do not recommend washing the removable heating vessel.
Simply refill the wax beads if necessary.
Use of the appliance
BEWARE OF THE RISK OF BURNS: Before any operation, test the temperature of the
melted wax on a small area of your body before spreading it on the area to be
depilated
This device is compatible with all types of non-strip peelable wax.
1. Connect the power cord to the unit and the cord to your power outlet.
2. Place the removable heating vessel in the heating pot.
3. Add the wax of your choice (not supplied) to the removable pot.
4. Turn the temperature control knob and position it on the symbol
state. When the indicator light reaches the selected temperature, it goes out. To make it easier, mix the
wax with a wooden spatula.
5. The heating process takes about 15 minutes. For faster heating, place the lid on the heating pot.
6. Once the wax has become liquid, turn the knob to the symbol
throughout the use.
It is important to test the temperature of the wax by testing a small amount of melted wax on a small
area of your skin and adjusting the knob accordingly.
7. Adjust the temperature of the wax to suit your skin and sensitivity. Apply the wax to the area to be
waxed using the wooden spatula.
8. Wait for the wax to harden. Firmly remove the wax strip by pulling in the opposite direction of hair
growth while stretching the skin of the area to be waxed.
. The temperature remains constant
www.livoo.fr
until the wax reaches the liquid
EN
Advertenties
Inhoudsopgave
