Inhoudsopgave
Advertenties
7 Cleaning
TURN OF THE DEVICE AND REMOVE IT FROM THE POWER SUPPLY
EN
Device
Every 2 Weeks
If necessary, clean
the device with a
damp cloth.
Do not use caustic
or abrasive clea-
ning agents!
Ionizer - Cleaning
Sensor - Cleaning
BEFORE CLEANING / MAINTENANCE
HEPA-Filter
Every 2 months
This fi lter cannot be
cleaned and must
be replaced
After removal, place the HEPA and activa-
ted carbon fi lter in a well-ventilated place,
as previously absorbed particles or bacte-
ria could now escape.
The poles of the ionizer are located under the venti-
lation grille of the air outlet and can be cleaned with
a cotton swab� To do this, open the cover on the upper
side:
The sensor is located on the left side of the hand-
le under the cover provided for this purpose� It can
also be cleaned with a cotton swab after removing
the cover�
66
Activated carbon filter
Every 2 months
Thoroughly vacuum
the front of the fi lter
with a vacuum cle-
aner.
Pre Filter
Every month
Vacuum the fi lter
thoroughly with a
vacuum cleaner or
wash it under run-
ning water and let
it dry.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
