Inhoudsopgave
Advertenties
Note: Keep 4 pieces of approx. 50 x 50 x 5 cm
paving slabs with minimum total weight 90 kg close
at hand for the paving stand.
Insert the top pole section
pole section
(Figure E, step
3 ]
[
union nut
(Figure E, step
13 ]
[
˜ Opening the umbrella top
Release the handle
a counter-clockwise direction (Figure F, step
Push the handle
12 ]
[
stopper (top pole section)
Lock the handle by the locking knob
clockwise direction (Figure F, step
Push the crankcase
reaches the stopper (arm)
7 ]
[
step
). Lock the support rod
1
plastic sleeve
downwards to the holder
[
17 ]
(Figure G, step
).
2
Open the umbrella top
the crank
in a clockwise direction (Figure H,
14 ]
[
step
).
1
Note: The umbrella top
opened manually at the beginning. The fabric might
be stuck together.
To prevent issues during windy conditions, tie the
strap with adjustable buckle
section
(Figure H, step
[
9 ]
Note: Alternatively, insert the strap with adjustable
buckle
into the loops
20 ]
[
˜ Turning the umbrella roof
Release the handle
a counter-clockwise direction (Figure I, step
into the bottom
[
9 ]
). Tighten the
1
).
2
by the locking knob
12 ]
[
upwards until it reaches the
(Figure F, step
10 ]
[
in a
[
11 ]
).
3
upwards until the arm
[
15 ]
(Figure G,
[
18 ]
by inserting the
[
16 ]
completely by turning
8 ]
[
might need to be
8 ]
[
onto to top pole
[
20 ]
).
2a
(Figure H, step
[
22 ]
2b
by the locking knob
[
12 ]
Swivel the arm
desired position (Figure I, step
Lock the handle
clockwise direction (Figure I, step
˜ Inclining the umbrella top
Note: Do not incline the umbrella top during strong
wind conditions. The product might turn over. Risk of
injury and/or product damage.
in
[
11 ]
).
Release the handle
1
a counter-clockwise direction (Figure J, step
).
Move the handle
2
the desired inclination angle (Figure J, step
Lock the handle
clockwise direction (Figure J, step
˜ Closing the umbrella top, moving
the hanging umbrella
19 ]
[
Release the strap with adjustable buckle
from the top pole section
Close the umbrella top
the crank
(Figure K, step
Pull the plastic sleeve
(Figure L, step
[
19 ]
completely downwards (Figure L, step
Release the handle
a counter-clockwise direction (Figure M, step
Pull the handle
the union nut
handle by the locking knob
).
direction (Figure M, step
Secure the umbrella top by the strap
(Figure N).
in
11 ]
[
).
1
or the crank case
[
7 ]
2
by the locking knob
[
12 ]
by the locking knob
[
12 ]
upwards or downwards to
12 ]
[
by the locking knob
12 ]
[
(Figure K, step
[
9 ]
completely by turning
[
8 ]
in a counter-clockwise direction
[
14 ]
).
2
out from the holder
17 ]
[
). Pull the crankcase
1
by the locking knob
12 ]
[
completely downwards to
[
12 ]
(Figure M, step
[
13 ]
in a clockwise
11 ]
[
).
3
to the
15 ]
[
).
in a
11 ]
[
).
3
in
[
11 ]
).
1
).
2
in a
[
11 ]
).
3
[
20 ]
).
1
15 ]
[
).
2
in
[
11 ]
).
1
). Lock the
2
[
21 ]
GB/IE/NI
7
Advertenties
Inhoudsopgave
