Download Inhoudsopgave Inhoud Print deze pagina

How The Cooker Hood Works; Model Sdd2-L Glass Version - Sirius S-DD2-L FLUSH TOP Gebruiksaanwijzing

Inhoudsopgave

Advertenties

HOW THE COOKER
HOOD WORKS

MODEL SDD2-L GLASS VERSION

A:
Light ON/OFF key
The light switches on and off only when the
carriage is fully OPEN.
Pressing this button with the carriage closed
will cause the carriage to open and then the
light will switch on .
The button also serves to switch off the light
if it is on.
B:
ON/OFF key
This starts the extraction carriage upward
movement and when it is fully open, it sets the
second extraction speed.
With the carriage open: it switches off the mo-
tor and if on, the light; then it retracts the ex-
traction carriage.
C:
(-) Key
This reduces the speed of the extractor motor
from the 4th speed until the motor switch-
es off, without closing the pull-out car-
riage.
D:
Indicators
• This signals the speed setting, by only the
relevant LED switching on.
• This signals that all filters have been satu-
rated by all LEDs switching on.
E:
(+) Key
This increases the speed of the extractor mo-
tor, from 1st to 4th speed, without moving the
extractor panel.
20
EN
F:
Timer
10 min after setting, it serves to stop the ex-
tractor motor, close the carriage and switch
the lights off, if they are on. The set function is
signalled by the flashing LEDs "D" for the set
speed. The timer can be cancelled by press-
ing the key again.
Other functions:
TIMING
As a result of the new EU65 "Energy label" and
Automatic turn off:
EU66 " Ecodesign" regulations issued by the
After 4 hours of continuous working from the
European Commission, which came into force
last setup, the appliance turns off and closes
as from January 1st, 2015 , our products have
automatically.
been adapted to comply with these new requi-
rements.
Grease filters saturation:
All of the models complying with the energy label
After 30 hours of working, the speed indica-
requirements, are equipped with new electroni-
tors "D" will all flash simultaneously, signaling
cs including a timer device for suction speeds
the grease filters saturation.
control, when the air capacity exceeds 650m
To reset this alarm, hold down the "TIMER"
Internal motor models, with maximum air capa-
button for at least 3 seconds, while the car-
city higher than 650m
riage is open.
mer device that automatically switches the suc-
tion speed from 4th to 3rd speed, after 6 minutes
Calibration:
operation.
The cooker-hood carries out its self-calibra-
External motor models are equipped with remo-
tion every 3 complete cycles of its extractable
te motors that , as for internal motor versions,
unit.
include a timer device that switches down the
By pushing the "TIMER" key 6 times consec-
suction speed when it exceeds 650 m
utively (MAX break between one push and the
External Motors Instructions )
other is 3 sec.) all the leds will flash and the
Remote motors, whose air capacity exceeds
calibration will be reset.
650m
After the next 3 cycles the downdraft will carry
/h at both 4th and 3rd speed , will have
³
the following by default timer control functions:
out its self-calibration.
The suction speed is automatically switched
from 4th to 2nd speed, after 6 minutes operation.
Stand-by:
If the appliance is working at 3rd speed, it is au-
When the extractable unit is closed and the
tomatically switched to 2nd speed, after 7 mi-
light is switched off, the control panel, after
nutes operation. Operation speeds can also be
6 seconds, activates the Stand-by function,
changed during operation.
reducing the brightness of the leds.
The energy consumption of the appliance in
This function can be stopped by pressing ON/
stand – by mode is lower than 0.5W.
OFF or LIGHT key.
/h, are equipped with a ti-
³
S-DD2-L FLUSH TOP
/h.
³
/h. (See
³

Advertenties

Inhoudsopgave
loading

Inhoudsopgave