Advertenties
Do not load with workpiece contact (safety
A2
element) or trigger depressed
Top Load
B1
Depress latch, Slide rail open
1
2
Release at rear of tool
Depress latch, Slide rail open
B2
Release at magazine
B3
Pull feeder shoe back into "locked" postion.
Pull feeder. Tap to release
C1
The deflector can be rotated to change the
direction of the exhaust air
Adjustable
C2
The deflector can be rotated to change the
direction of the exhaust air
Rear, Adjustable
①
D2
②
1
work surface and drive a fastener.
Each time you push the workpiece contact
2
(safety element) against the work surface, a
Bottom
fastener is driven.
E1
These tools are equipped with a drive rate
adjustment. To adjust the speed, rotate
the screw not more than three turns,
counterclockwise to increase the drive rate.
Rotate the screw clockwise not more than
three turns, to slow the drive rate. For single
shot operation, pull trigger only partially. For
automatic operation, pull trigger fully.
Auto Fire Option
E2
This tool is equipped with a drive rate
adjustment. To adjust the speed, rotate
the screw, not more than three turns,
counterclockwise (Q) to increase the drive rate.
Rotate the screw clockwise (P), not more than
three turns, to slow the drive rate.
Auto Fire Option
F1
Release E-Z Clear latch and open door.
Gate
Pull trigger.
Depress workpiece contact element against
Advertenties
