Inhoudsopgave
Advertenties
The appliance shall be used for its intended pur-
pose; this appliance has functions and operating
modes as shown on the figures. When you first
start the appliance, icons appear on the control
panel. The pictograms will fade after 60 seconds
if no buttons were pressed and the door remained
closed.
The control panel has two functional areas sho-
wing the temperature inside the refrigerator and
the temperature inside the freezer compartment,
seven pictograms indicating the operating mode
and four control buttons.
Temperature control
For the first start, the recommended temperature
in the refrigerator is 4°C and –18°C in the freezer.
To change the temperature, follow the instructions
below. Warning! The set temperature is an ave-
rage temperature within the refrigerator compart-
ment. Temperatures in the compartments may
differ from the values on the display, depending on
the quantity of stored products and their storage
location. Ambient temperature may also impact the
actual temperature in the appliance
All buttons are locked, if
panel. To unlock the control panel, press and hold
for 5 seconds.
1. Select the compartment
Press
to select the temperature control for
the refrigerator or freezer .
2. Refrigerator temperature
Once refrigerator temperature control is activated,
the refrigerator temperature indicator near re-
frigerator symbol
flashes. To set the desired tem-
perature of 2°C to 8°C or turn off the refrigerator
press the , button to increase the temperature or
, to decrease it. The display will show the values
according to the following sequence:
3. Freezer temperature
Once freezer temperature control is activated, the
freezer temperature indicator near freezer symbol
flashes. To set the desired temperature of –25°C
to –15°C press the , button to increase the tem-
perature or , to decrease it. The display will show
the values according to the following sequence:
OPERATION AND FUNCTIONS
is shown on the control
Select function
Press the
button to select the desired func-
tion. The selected mode pictogram will flash for
10 seconds. When a function is activated you will
hear two beeps and the relevant pictogram will be
shown on the display.
4. Super Cool
The Super Cool function enables rapid cooling of
food products so they stay fresh longer.
• To activate this function press the function selec-
tion buttonl
until the
on the
display.
• To turn off the Super Cool function press the
compartment selection button
desired temperature of the selected compart-
ment or use the
function.
5. Supper Freeze
With the Super Freeze function you can rapidly
reduce temperature in the freezer, so that food-
stuffs retain vitamins and nutrients and will remain
fresh for longer.
• To activate this function press the function selec-
tion button
until the
on the display.
• Freezing the maximum quantity of food takes
approximately 24 hours.
• The Super Freeze function is automatically
disabled after 32 hours, and the temperature set
on the freezer is –25°C.
• To turn off the Super Freeze function press the
compartment selection button
desired temperature of the selected compart-
ment or use the
function.
6. Holiday
When you go away for an extended time, use the
Holiday function.
• To activate the Holiday function press function
selection button
shown on the display.
Note: Before holiday function activation, remo-
ve all perishable products from the refrigerator
compartment and leave the door closed. Do not
remove the products from the freezer compart-
ment. This function only works for the refrigerator
compartment and has no impact on the frozen
products.
• and set the desired temperature of the selected
compartment or use the
different function
27
pictogram is shown
and set the
button to select a different
pictogram is shown
and set the
button to select a different
until the
pictogram is
button to select a
.
Advertenties
Inhoudsopgave
