Inhoudsopgave
Advertenties
Product Safety Information
Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Impact Wrenches Product Safety Information Manual Form
04580916.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Model(s)
Style
290, 290-EU
Pistol
290-6, 290-6-EU Pistol
290-S
Pistol
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 04581666 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
1.
Air filter
2.
Regulator
3.
Lubricator
4.
Emergency shut-off valve
5.
Hose diameter
6.
Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts
be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
Form 16581969-Edition 1
Drive
Impacts
per min.
Type
Size
Square
1"
Square
1"
6" extended
Spline
#5
Recommended
Torque Range
ft-lbs (Nm)
150 - 1000
800
(203 - 1356)
150 - 1000
800
(203 - 1356)
150 - 1000
800
(203 - 1356)
7.
Coupling
8.
Safety Air Fuse
9.
Oil
10. Grease - during assembly
11. Grease - through fitting
Sound Level dB(A)
(ANSI S5.1-1971)
Power
Pressure
(ISO 3774)
104.6
117.6
104.6
117.6
104.6
117.6
Vibration
Level
(ISO 8662)
m/s²
12.2
8.2
12.2
3
Advertenties
Inhoudsopgave
