Inhoudsopgave
Advertenties
Supplied Mounting Accessories
•
4 Screws
•
4 Spacers
•
1 Drilling template
CAUTION:
• Please adhere to the dimensions stated in the installation instructions.
•
You should use only the installation accessories supplied.
•
Tape the template firmly down to the shelf with ahesive tape. With the
help of a gimlet or nail pierce the crosses at the attachment points and
use it to mark the holes.
•
Remove the template and drill the holes into the wall cupboard.
•
Insert the spacer into the holes provided on the device.
NOTE:
•
Sufficient ventilation is only guaranteed with a spacer.
•
Countersink the screws into the holes in the cupboard.
•
Using the 4 screws and the spacers, attach the kitchen
•
radio to the bottom of the cupboard.
•
Tighten the screws hand-tight with an Allen wrench.
•
CAUTION:
•
Use an Allen wrench and not an electric screwdriver.
MAINS (AC) OPERATION
Make sure that the device is adequately ventilated!
If applicable, remove the protective film from the display.
Power Supply
Please ensure that the mains voltage corresponds to the information on the
type plate. Plug the power plug into a properly installed socket.
Inserting the Power Reserve Battery
(Battery not included in scope of delivery)
During a power outage, or when the power plug is pulled from the socket, the
clock time and the alarm times will be lost. To prevent this, insert a power re-
serve battery as follows.
•
Open the battery compartment on the bottom. Turn the battery com-
partment lid in the direction "OPEN".
•
Insert a button cell battery of the type CR 2025 3 V. Ensure the correct
English
2
Advertenties
Inhoudsopgave
