Download Inhoudsopgave Inhoud Print deze pagina

Cleaning And Maintenance; Technical Data - MPM MCZ-119 Gebruikershandleiding

Inhoudsopgave

Advertenties

2. Open the kettle lid with the button (lever) (3) and fill it with water to the desired level (however,
the water level must not exceed the MIN (0.5 l) and MAX marks (1.0 l). Close the lid (2) carefully.
3. Place the kettle on the base (7). Turn on the kettle by using the switch (5).
4. The kettle will turn off automatically, when the water starts boiling. However, if necessary, it can
be turned off earlier by using the switch (5).
5. After boiling water or switching off the kettle, wait approx. 15-20 seconds before switching it back
on. The overheating protection system turns the device off when the kettle is turned on without
water. Allow the kettle to cool down for approx. 15 minutes before refilling.

CLEANING AND MAINTENANCE

Regularly clean the kettle from lime deposits. Use dedicated kettle descalers (follow the instructions
in the descaler manual) or a mixture of water with vinegar or citric acid. Failure to descale the kettle
may result with device damage. Wipe the kettle inside and out with a cloth. Do not use a wire brush,
scouring pads or strong detergents.

TECHNICAL DATA

Technical specifications are given on the product nameplate.
Length of mains cable: 0.7 m
CAUTION! MPM agd S.A. reserves the right to technical changes!
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
This manual has been machine translated.
In case of any doubts, please read its English version.
EN
15

Advertenties

Inhoudsopgave
loading

Inhoudsopgave