Inhoudsopgave
Advertenties
Intended Use
The solar pump has been designed for fountain, pond or outdoor use; the
Pump drives its power from a solar module directly. In order for the pump to
operate, the solar module needs to be placed in direct sunlight. The
performance of the pump depends on the season and the position of the solar
module.
Assembling and Setting up
Unpack and check all components.
Unroll the pump cable
Place the pump underwater. Make sure that when the pump operates, it is
fully underwater. Choose which plastic tubes and fountainheads to use
according to your preference or alternatively use a PVC hose (not included).
Set up the solar panel too face the sun and connect it to the pump with the
included cable.
Attention: Do not allow the pump to run dry, do not lift the pump by the power
cord, operate in freshwater only and do not strike the solar panel
Cleaning and Maintenance
Pump: If, after a period of time, the pump starts to lose power or stops working
check for the build up of sediment, scale or dirt in the filter. Remove the pump
cover and the impeller cover. Clean them and the filter by fresh water.
Solar panel: The panel should be cleaned periodically with a soft tissue. Regular
cleaning of the panel is advised to maintain optimum conversion of the sun's
energy into direct current.
Technical Data
Solar Cell:
Pump:
Max. Delivery Height:
Max. Water Discharge:
Max. Delivery:
Dimensions of the Pump:
Operation
9 V / 555 mA, 5 Watt (29 x 20,5 cm)
11 V
, 4,8 W IP68, brushless
1,5 m
0,8 m
500 l/h
7,2 x 4,4 x 3,5 cm
7
Advertenties
Inhoudsopgave
