Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
User Manual
5.3
Adjusting the blower intensity
Fig. 17: Adjusting the blower intensity
5.4
Rotation
Fig. 18: Rotation
The fan can rotate 180° during operation, Fig. 18.
Fig. 19: Rotation „ON"
Fig. 20: Rotation „OFF"
20
Risk of injury due to improper handling
•
Operate the device only with the protective net closed and intact.
• Do not insert any fingers or objects through the protective net.
This can lead to injuries or damages to the device.
•
Keep long hair and loose clothing away from the fan.
These can be sucked in by the air flow.
•
NEVER leave unattended while in operation.
The blower intensity can be adjusted in 3 steps by turning the rotary
switch (fig. 15, no. 22):
0 = Off
1 = Low
2 = Medium
3 = High
ON: Push the rotation adjustment pin (19, fig.6) into the motor housing.
The fan starts to rotate.
OFF: Pull the pin out of the motor housing again.
The rotation mode is stopped and the fan stops at the position where
the rotation was interrupted.
•
Disconnect the fan from the mains when not in use.
Advertenties
Hoofdstukken
Inhoudsopgave
