Inhoudsopgave
Advertenties
3. Tighten the keyless chuck.
4. Check that the accessory tool is held securely.
5.6
Fall arrest
WARNING
Risk of injury by falling tool and/or accessory!
▶ Use only the Hilti tool tether recommended for your product.
▶ Prior to each use, always check the attachment point of the tool tether for possible damage.
▶ Do not secure a tool tether to the belt hook. Do not use a belt hook to lift the product.
Comply with the national regulations for working at heights.
As drop arrester for this product, use only a combination of the Hilti retaining strap #2293133 and the Hilti
tool tether #2261970.
▶ Secure the retaining strap to the installation openings for accessories. Check that it holds securely.
▶ Secure one carabiner of the tool tether to the retaining strap and secure the second carabiner to a
load-bearing structure. Check that both carabiners hold securely.
Comply with the operating instructions of the Hilti retaining strap and those of the Hilti tool tether.
6
Operation
CAUTION
Risk of injury if the accessory tool stalls !
▶ Check that the side handle is fitted correctly and tightened securely. Always hold the tool with both
hands on the grips provided.
▶ Wear eye protection to prevent splintering material from injuring your eyes.
Observe the safety instructions and warnings in this documentation and on the product.
6.1
Selecting the gear
▶ Select the gear.
6.2
Setting forward or reverse rotation
▶ Set the forward/reverse switch to forward or reverse rotation, as applicable.
6.3
Switching on
▶ Press the control switch.
▶ The product starts.
Speed can be controlled steplessly by varying how far the control switch is pressed in.
6.4
Screwdriving
6
▶ Set the torque and operating mode selector ring to the required torque.
6.5
Drilling
6
▶ Set the torque and operating mode selector ring to
6.6
Hammer-action drilling
▶ Set the torque and operating mode selector ring to
*2275217*
4
5
6
2275217
.
.
English
23
Advertenties
Inhoudsopgave
