Würth EWS 10-125 COMPACT Vertaling Van De Originele Gebruiksaanwijzing pagina 29
Verberg thumbnails
Zie ook voor EWS 10-125 COMPACT:
- Vertaling van de originele gebruiksaanwijzing (295 pagina's)
Advertenties
WARNING!
Risk of severe injuries.
 If the machine is set to continuous
running, it will continue to run if it
is torn out of your hand.
¾ Always hold the machine with both
hands at the handles provided,
take up a stable posture and
concentrate on the work in hand.
Machines with trigger switch
Switch ON
Push the trigger switch [1] forwards.
■
• For continuous operation, then press down-
wards until it engages.
Switch OFF
Press the rear end of the trigger switch [1] and
■
release.
Machines with dead man function
Switch ON
Push the switch-on inhibitor [4] in the direction
■
of the arrow and press trigger switch [3].
Switch OFF
Release trigger switch [3].
■
Working instructions
Grinding
Apply moderate pressure with the machine and
■
move back and forth across the surface so that
the workpiece surface does not become too hot.
Roughing
A good working result is obtained with a
■
working angle of 30° - 40°.
Cut-off grinding
Attention!
¾ Always work up-milling mode during cut-off
grinding!
 Otherwise there is a risk of the machine jump-
ing uncontrolled out of the cut.
Work with moderate feed adapted to the mate-
■
rial being cut. Do not tilt, press or oscillate.
Sanding
Apply moderate pressure with the machine and
■
move back and forth across the surface so that
the workpiece surface does not become too hot.
Working with wire brushes
Apply moderate pressure with the machine.
■
Maintenance and cleaning
WARNING!
Danger of electric current.
¾ Carry out maintenance and
cleaning work on the device only
when the mains plug has been
removed.
CAUTION!
Dusts from materials can be harmful
to health.
¾ Use a dust mask or respirator.
Motor cleaning
Blow out the machine with compressed air
■
through the rear ventilation slots regularly, fre-
quently and thoroughly. Hold the machine firmly
while blowing out.
29
Advertenties
