Inhoudsopgave
Advertenties
Instructions for use
You can activate or deactivate the cooker
hood by operating the functions shown in the
diagram.
Switch on the extractor fan a few minutes
before you start to cook in order to ensure that
a steady air flow has been established before
fumes appear.
Allow the extractor fan to run for several
minutes after you have finished cooking
(between 3 to 5 minutes) in order to expel all
the grease from the outlet duct. This prevents
the return of grease, smoke and smells.
4
3
1. Lighting
2. Selected speed increase
3. Selected speed decrease
4. Timer
Program the working time
• By pressing + / - turn on the hood and choose
the desired suction speed
• Press the Timer key. The light will start flashing.
• The duration of the programming time is
approximately 15 minutes.
• During the programmed time you can change
the suction speed.
• The Intensive speed is self-programmed and
will switch to speed 2 after approximately 7
minutes.
Fresh Function
•The fresh function consists on activating the
motor at speed 1 for ten minutos each hour. This
function will stay active for 24h or until it is manu-
ally turned off.
• To activate/deactivate this function, press the
" - " button for 3 seconds.
2
1
Cleaning and maintenance
During cleaning and maintenance work,
make sure the safety instructions are
complied with.
Cleaning the hood body
• If your kitchen hood is made of stainless
steel, use proprietary cleaners mentioned in
the product instructions.
• If your kitchen hood is painted, use lukewarm
water and a neutral soap.
• Never use metallic scourers, nor abrasive or
corrosive products.
• Dry the kitchen hood using a cloth that
does not produce fibres. Do not use vapour
cleaners.
• To remove the filters from their fittings, press
lightly on the locks and then pull them off.
Cleaning the metal filters
• To remove the filters from their fittings, press
lightly on the locks and then pull them off.
• The metal filters can be cleaned by soaking
them in hot water with neutral detergent until
the fat dissolves and then rinsing them under
the tap or using special anti-grease products.
They can also be washed in a dishwasher.
In this case, it is advisable to stack them
vertically to avoid food residues to stick to
them.
• Cleaning in a dishwasher may damage the
metallic surface (blackening it), although this
will not affect its fat retention capacity.
• Once clean, leave them to dry off and then fit
them onto the kitchen hood.
Lights
For changing the light bulbs please contact the
manufacturer's nearest Technical Service.
Lamp code:
150 mm: 81493014
200 mm: 81493015
250 mm: 81493033
Advertenties
Inhoudsopgave
